Rebrew Series #1 Scottish 60 part 3

So this is part 3 of the Scottish 60 rebrew and we are ready to be tasting. You can check out parts one and two right there on the links.
I kegged this about two weeks ago and I’m just doing the set and forget carb method, so no shaking or over pressurizing.

What I was trying to do was go back to these beers that I brewed when first starting out. Where they as good as I remember? And can I improve them a bit using what I have learned since then. And as far as I can gather, its been 20 years since last brewing this one.

I was trying to get a caramel backbone both then and now. Then I tried using a boil down of first runnings to try and caramelize the sugars, which was pretty much out of character for the historic brewing. So this go round I used the more traditional style of grain bill to get where I wanted. Crystal 60 and 80 were the focus here.

I did almost nothing out of the ordinary with this brew just a regular day on the Mash and Boil.

So how did it turn out?

Poured me a pint of this dark copper beer. Nice light tan head, that probably would have stayed a bit longer, but I just grabbed a glass from the cupboard. A beer clean glass would have helped. But the lacing was still pretty good.

Oh lord the caramel. Not overpowering, but definitely the main event here. Just the bit of what I would call chocolate or something close to that. And that US04 yeast is there but took a bit of warming to get.

The caramel follows into the taste as well. And,, as I was trying to get, a bit of Diacetyl. This is why I fermented at a lower than normal temp with the US04, to see if I could get some of that buttery in here. And it worked. Not strong, but it don’t need to be strong to be noticeable. Now maybe that chocolate note I was smelling was the diacetyl or butterscotch maybe.

No hop taste but the yeast esters are building the warmer it gets. Bitterness is very low, but countering the sweetness.

I gotta say that I really like this beer. And would also say while I remember really liking the first run, this is probably closer to what I was intending to brew back then. Its got all of those tastes I wanted, a bit dryer and probably much more to style.. Other than its slightly bigger than what a Scottish Light would be. This would most likely be in the Heavy range as we are close to a 5% beer.

I’m going to say that the improvements in this rebrew are a success and that this is a pretty good beer, I’m sure it wont stick around long.

That was fun going back and trying to rebrew some of the first beers. But stay tuned. I have another rebrew coming up this week. A newer brew than this one, but it fits in with one of our club activities.

Labor Day weekend Brews. strong ale and ginger mead

It’s a great weekend to brew. It’s starting to get cool out and it’s a long weekend.

Yesterday we went thru the hop stocks we have in the garage. It’s time to use them up before the equipment move back downstairs for the winter.

We have quite a bit so Sounds like a strong ale to me.

  • 12 lbs Maris Otter
  • 1 lb crystal 60
  • 1oz pilgrim hops @60
  • 1/2oz citra @15
  • 2oz cascade @15
  • 1/2oz citra @ flameout
  • 2oz cascade @ flameout
  • Nottingham yeast. Mashed at 151 2 hour boil
It is pretty looking tho.

Next up a mead. 2nd mead in a month. With maybe one more coming along.

So this one is ginger lime.

2 1/2 lbs wildflower honey
About 2 inches of ginger. This may be a bit much for a gallon. Lol.
3 limes.

Mixed and stirred everything up with enough water to get 1 1/2 gallons of must and a 1/2 tsp of nutrient.

Oh.. forgot yeast for this guy. But luckily we brewed the strong ale yesterday, so I grabbed about a cup off the top. Should work great since the OG is 1.082.

Put everything into the party pig and it’s ready to rip!

 

Cranberry Mead

Now, mead is not one of my favorite things for some reason. I mean, I should like them, right? Who don’t like honey?

Oh I have had a few that were phenomenal, and also some that were the worst homebrewed things I ever had. (one was so bad it turned me off of an entire genre of beers)

I have made a couple of meads in the past. They ranged from ok, to maybe not. Mostly because of ingredient choices. Somethings just aint cut out for mead.

But I’m not a quitter. I’m going to find a combination that I like sooner or later. And this past version may be just that. Cranberry mead.

Now I put a little thought into it this time, I was looking at a 3 gallon batch. Lower alcohol so it can be drinkable relatively sooner than normal. A sweeter version. And,, well… cheap. Meads can quickly deplete the wallet quickly.

So what I came up with is: Cranberry Mead
5lbs Costco Wildflower Honey
3 lbs can Vinters Harvest Cranberry Puree
3.25 gallons filtered water
Nutrient
Nottingham Yeast

Using honey and puree is just a matter of dumping and stirring. And while yes I did figure on a bit of displacement, I didn’t figure on quite as much as we got. After getting everything mixed in as measured, it appears we have about 4-4.5 gallons of must.
Am going to assume we will lose atleast a .25 gallon on first rack then maybe another .25 between the next rack and bottling.

The last wine was the same volume and we just racked to my 3 gallon carboy and a separate 1 gallon fermenter. (its nice to have odd ball sizes of jugs laying around) But in the future I will have to adjust for this. 

We had an OG at pitch of 1.052,, and I would expect the Notty to stop around 1.010. That would be around 5.5%, and perfect for what I’m looking for. 

Will be doing staggered nutrient additions, which for mead, especially cranberry, is really needed because the honey has nearly nothing. So I’m going to put in ½ teaspoon today. Stirring every day for 5 days but adding nutrient only every other day. This helps the yeast by releasing some C02 and getting that nutrient in.

This right now is some tasty stuff. Would be a good mixer for some vodka. I hope it holds some of this character when its finished. I guess we will see.